This guide will work fine with cpanel, ensim, plesk, and of course with no control panel. It is designed for Redhat but should work on any linux varient.

The first step is to check if /tmp is already secure. Some datacenters do not create a /tmp partition while others do.
-----command-----
df -h |grep tmp
-----command-----


If that displays nothing then go below to create a tmp partition. If you do have a tmp partition you need to see if it mounted with noexec.

-----command-----
cat /etc/fstab |grep tmp
-----command-----

If there is a line that includes /tmp and noexec then it is already mounted as non-executable. If not follow the instructions below to create one without having to physically format your disk. Idealy you would make a real partition when the disk was originally formated, that being said I have not had any trouble create a /tmp partition using the following method.

Create a 190Mb partition
-----command-----
cd /dev/; dd if=/dev/zero of=tmpMnt bs=1024 count=800000
-----command-----

Format the partion
-----command-----
mke2fs /dev/tmpMnt
-----command-----
When it asks about not being a block special device press Y

Make a backup of the old data
-----command-----
cp -Rp /tmp /tmp_backup
-----command-----

Mount the temp filesystem
-----command-----
mount -o loop,noexec,nosuid,rw /dev/tmpMnt /tmp
-----command-----

Set the permissions
-----command-----
chmod 0777 /tmp
-----command-----

Copy the old files back
-----command-----
cp -Rp /tmp_backup/* /tmp/
-----command-----

Once you do that go ahead and restart mysql and make sure it works ok. We do this because mysql places the mysql.sock in /tmp which neeeds to be moved. If not it migth have trouble starting. If it does you can add this line to the bottom of the /etc/fstab to automatically have it mounted:

Open the file in pico:
-----command-----
pico -w /etc/fstab
-----command-----
Now add this single line at the bottom:

/dev/tmpMnt /tmp ext2 loop,noexec,nosuid,rw 0 0

While we are at it we are going to secure /dev/shm. Look for the mount line for /dev/shm and change it to the following:
none /dev/shm tmpfs noexec,nosuid 0 0

Umount and remount /dev/shm for the changes to take effect.
-----command-----
umount /dev/shm
mount /dev/shm
-----command-----

Next delete the old /var/tmp and create a link to /tmp
-----command-----
rm -rf /var/tmp/
ln -s /tmp/ /var/
-----command-----

If everything still works fine you can go ahead and delete the /tmp_backup directory.
-----command-----
rm -rf /tmp_backup
-----command-----

You /tmp, /var/tmp, and /dev/shm are now mounted in a way that no program can be directly run from these directories